HTML Logo by World Wide Web Consortium (www.w3.org). Click to learn more about our commitment to accessibility and standards.

Moving forward with Composr

ocPortal has been relaunched as Composr CMS, which is now in beta. ocPortal 9 will be superseded by Composr 10.

Head over to compo.sr for our new site, and to our migration roadmap. Existing ocPortal member accounts have been mirrored.


<SOLVED>!!the body is not parallel with side menues!

Login / Search

 [ Join | More ]
 Add topic 
Posted
Rating:
#59865 (In Topic #13023)
Avatar

Well-settled

hi, thank to every boy for all yours helps in many things about the ocp!
I have a little problem and i dont understand when start it, i think that it whas when i tried to install a new theme spring bloom. After that, when i enter in the web page, i have the side menues just in the left side and the central body is down, where finish the side menu . i need to alligne it with the side menu, i have try all… but by the moment without result! something can help me? where i can change something? in the css i have try, and i have reinstalled originals css but nothing!
thanks very much to all!!!!


Last edit: by roypitt
Back to the top
 
Posted
Rating:
#59870
Avatar

Community saint

It might be helpful if you provide a screen shot for us to see the problem easier.


Art and Imagination
of David L Friend

http://davidlfriend.com

  My Art Gallery
powered by ocPortal
Back to the top
 
Posted
Rating:
#59886
Avatar

Well-settled

Ok, yes sure! here 2 screen capture.
the first one is the top and second the footer, as can see the page is very long because the menu and the central body are vertical alined and i want aline in horizzontal as the original ocp.
thanks very much!! .
Back to the top
 
Posted
Rating:
#59887
Avatar

Well-settled

i try again to post the attachment……
Attachment
image2
» Download: Imagen 2.png (1.02 Mb)
Back to the top
 
Posted
Rating:
#59961
Avatar

Well-settled

some help please? ……  thanks very much!!!!
Back to the top
 
Posted
Rating:
#59963
Avatar

Community saint

Hello roypitt,

From your attachments alone and without seeing the CSS files it is difficult to advise you properly as to what went wrong and how to redress it. If you can open your site for visitors and give its address here, several among us can have a look at your front page with a tool like "Firebug" and probably make suggestions.

I'm traveling right now, but when I get back on-line I will have a look if you do this.

Jean
Back to the top
 
Posted
Rating:
#59977
Avatar

Well-settled

thanks very much! the site is open and the link is that:
Desde 1984 Haciendo Profesión -- FENACO
have a nice trip and thanks again!!
Back to the top
 
Posted
Rating:
#59978
Avatar

Well-settled

whats the css for the body? i want try to take a look but im not sure, i think is the global.css
Back to the top
 
Posted
Rating:
#59992
Avatar

Community saint

You might want to look at the SETUP/CONFIGURATION/THEME OPTIONS
and see if you have the first 2 lines set up with something like:
Panel Width 13.3em
Panel Width with spacing 14.3em
I believe this is set up for 2 side panels and the middle content so it may give you a right margin too - oops!
…but whatever, looking at your site with firebug it appears that you are needing a left margin for the middle content column at least.

in firebug you can play around with css and stuff so if you add:

Code

element.style {
margin-left:14.3em;
width:auto;
}
to the firebug style tab on the right. Your page is only showing the

Code

width:auto
portion. by adding the left margin it moves the middle over (but not up to the top)

This is for the line starting (at the firebug html tab)

Code

<div id="page_running_start" class="zone_running_ global_middle dequirk" style="width: auto;">
I can't tell you where this could be inserted in some portion of the ocPortal code but
this might get you nearer the answer.

Someone else may have a more on target reply.


Art and Imagination
of David L Friend

http://davidlfriend.com

  My Art Gallery
powered by ocPortal
Back to the top
 
Posted
Rating:
#59998
Avatar

Community saint

roypitt,
After following friendly's recommendations to regain the 2 side panels, you may want to change the background color of your global.css-> global_top with the following code:

Code

.global_top {
background-color: #000000;
}
to give it a black background and a better looking panther eyes.

Unless you prefer a tall header, I suggest also that you reduce the top margin of the global.css–>global_zones from the present 60px to 0px or anything in between. the lower this number, the less space the logo will occupy in height. Here is the code reference:

Code

 .global_zones {
margin-top: 0px;
Back to the top
 
Posted
Rating:
#60020
Avatar

Well-settled

thanks very much  for your help…. im trying to do it, but by the moment nothing!! im trying to edit css from dreamweawer directly but i dont found this code …
element.style {
margin-left:14.3em;
width:auto;
}
i just want to 2 lateral panels and central body, and i dont know why i loose the config!
thanks for the tips for the look on the theme, but this is just one test for see if the site back to original status!! my  theme is other one!…
so…. i dont stop my find of a solution….
thanks very much again!
Back to the top
 
Posted
Rating:
#60073
Avatar

Well-settled

So, i have try to instal the ocp in another domain, when was installed all was right.After that i have start to translate the ocp starting from the footer of the page in the opcion "translate o refrase this program" and after less or more 60 frases translated , the page change and now have the same problem of the other one! i think that the problem start with the translation…. is possible that? and if yes, where i can change something for solve it? thanks very much!!!
link: http://fenaco.todochollazos.com
Back to the top
 
Posted
Rating:
#60076
Avatar

Well-settled

… or maybe something know wich .tpl i must recovery?
please… a little help!! thnks!!!!!
Back to the top
 
Posted
Rating:
#60077
Avatar

Did you translate 'dir', 'en_right', or 'en_left'? If so it may be the cause as these take only special values.


Become a fan of ocPortal on Facebook or add me as a friend. Add me on on Twitter.
Was I helpful?
  • If not, please let us know how we can do better (please try and propose any bigger ideas in such a way that they are fundable and scalable).
  • If so, please let others know about ocPortal whenever you see the opportunity.
  • If my reply is too Vulcan or expressed too much in business-strategy terms, and not particularly personal, I apologise. As a company & project maintainer, time is very limited to me, so usually when I write a reply I try and make it generic advice to all readers. I'm also naturally a joined-up thinker, so I always express my thoughts in combined business and technical terms. I recognise not everyone likes that, don't let my Vulcan-thinking stop you enjoying ocPortal on fun personal projects.
  • If my response can inspire a community tutorial, that's a great way of giving back to the project as a user.
Back to the top
 
Posted
Rating:
#60079
Avatar

Well-settled

No, i have translate it from the footer of the page where there is "select development tool" –>Translate/ re-phrase the software.I choose it and open a page titled "Translate/re-phrase the software into English" here is possible edit many phrases….
all special values as "<a href="{1}">" or similar i have copy and paste it in the new translation.
thanks very much Chris
Back to the top
 
Posted
Rating:
#60080
Avatar

You do seem to have translated en_left to izquierda.

That is a CSS float value, and it's only editable to either 'left' or 'right'. It's used to help people create right-to-left translations.


Become a fan of ocPortal on Facebook or add me as a friend. Add me on on Twitter.
Was I helpful?
  • If not, please let us know how we can do better (please try and propose any bigger ideas in such a way that they are fundable and scalable).
  • If so, please let others know about ocPortal whenever you see the opportunity.
  • If my reply is too Vulcan or expressed too much in business-strategy terms, and not particularly personal, I apologise. As a company & project maintainer, time is very limited to me, so usually when I write a reply I try and make it generic advice to all readers. I'm also naturally a joined-up thinker, so I always express my thoughts in combined business and technical terms. I recognise not everyone likes that, don't let my Vulcan-thinking stop you enjoying ocPortal on fun personal projects.
  • If my response can inspire a community tutorial, that's a great way of giving back to the project as a user.
Back to the top
 
Posted
Rating:
#60081
Avatar

Well-settled

so i must leave it "en_left" or just "left"?
Back to the top
 
Posted
Rating:
#60083
Avatar

Well-settled

OK! solved…. was  this problem! i translate en-right and en-left! so now i rewrite as the original and the margin come back normal! thanks very much to all people that have help me!!!!!!!!
Back to the top
 
Posted
Rating:
#60102
Avatar

Hi,

I note the descriptions for the fields are not showing in the translation interface you used; that's a usability problem we'll have to fix.


Become a fan of ocPortal on Facebook or add me as a friend. Add me on on Twitter.
Was I helpful?
  • If not, please let us know how we can do better (please try and propose any bigger ideas in such a way that they are fundable and scalable).
  • If so, please let others know about ocPortal whenever you see the opportunity.
  • If my reply is too Vulcan or expressed too much in business-strategy terms, and not particularly personal, I apologise. As a company & project maintainer, time is very limited to me, so usually when I write a reply I try and make it generic advice to all readers. I'm also naturally a joined-up thinker, so I always express my thoughts in combined business and technical terms. I recognise not everyone likes that, don't let my Vulcan-thinking stop you enjoying ocPortal on fun personal projects.
  • If my response can inspire a community tutorial, that's a great way of giving back to the project as a user.
Back to the top
 
Posted
Rating:
#60112
Avatar

Well-settled

do u think that is because i have touch something, or is as a bug?
how i can solv it? thanks Chris!
Back to the top
 
There are too many online users to list.
Control functions:

Quick reply   Expand